SOUND INVESTMENTS

To get the full potential out of any audio it is important that your supply of current is as good as possible.
With Ansuz Mainz products, it is possible to design combinations to match the best High End systems.
Logically, you do not want to invest heavier than needed for you set-up and still get the best level of performance,
with durable upgrade possibilities.

Electrical Grounding

Cable lengths matters

Due to the construction of Ansuz cables, you will always get a more positive influence on the sound quality when using longer cables. Obviously, there are limitations to how long cables you want in your system. However, any Ansuz cable in two meter will clearly sound better than a one meter – four meter performs better that a two meter.

Quality level is superior to cable lengths

An Ansuz cable in a higher quality level will outperform any length of cable from a lower level. So, if you do not need the length of an 4 meter Ansuz Aluminum you should rather go for a 2 meter Ansuz Ceramic.

Electrical Grounding

All Ansuz Mainz cables feature DGC technology® (Direct Ground Connector). With all your components connected with Mainz cables to an Ansuz Mainz 8 power distributor, you will minimize the ground potential between your devices and thus minimize ground current and signal induced fluctuations.
It can be an advantage to connect Ansuz Mainz cables to a grounded wall power socket. However, it is not necessary, if you use an Ansuz power distributor. The Ansuz Mainz 8 feature an extremely low impedance star grounding configuration.

Examples on Ansuz Mainz systems that are easy upgradable: Fig. 1-4

Prioritized upgrade path

Mainz-P-upgrade.png

System 1

1. Add an Ansuz Sparkz / Sparkz TC to the power distribution bar
2. Upgrade the main power cord to A. Preferable 4 meter.
3. Upgrade the amplifier power cord to A. Preferable 2 meter.
4. Change the NN power distribution bar to an Ansuz Mainz 8 A / D
5. Upgrade the CD player/source power cord to A. Preferable 2 meter.
6. Add more Ansuz Sparkz / Sparkz TC

When going further upgrade level A to C / C to D levels

Mainz-A-upgrade.png

System 2

1. Upgrade the main power cord to C. Preferable 4 meter.
2. Upgrade the preamplifier power cord to C. Preferable 2 meter.
3. Upgrade the CD player/source power cord to C. Preferable 2 meter.
4. Upgrade the power amplifiers power cord to C. Preferable 2 meter.
5. Add Ansuz Sparkz / Sparkz TC - 1 to 5 pcs.
6. Upgrade to / or add the Ansuz Mainz 8 D
When going further upgrade level C to D

Mainz-C-upgrade.png

System 3

1. Upgrade the main power cord to D. Preferable 4 meter.
2. Upgrade the preamplifier power cord to D. Preferable 2 - 4 meter.
3. Upgrade the DAC / RIAA power cord to D. Preferable 2 – 4 meter.
4. Upgrade the DAC / RIAA power cord to D. Preferable 2 - 4 meter.
5. Add an Ansuz Sparkz TC
6. Upgrade the power amps power cords to D. Preferable 2 - 4 meter.
7. Upgrade the CD transport / turntable power cords to D. Preferable 2 - 4 meter.
8. Add an Ansuz Mainz 8 D
9. Add Ansuz Sparkz TC - 1 - 7

When going further add another Ansuz Mainz 8 and more Sparkz TC

Mainz-D-upgrade.png

System 4

1. Add Ansuz Sparkz TC’s 1 - 7
2. Upgrade to longer Ansuz Mainz Diamond power cords, in this order: Between the two Ansuz Mainz 8 D’s, Main power cord (wall socket to first Ansuz Mainz 8 D), pre amp, RIAA, DAC, power amps, CD transport, turntable.
3. Add more Ansuz Mainz 8 D’s and Ansuz Sparkz TC’s



If you want to know more about how to set up an Ansuz Mainz system, please contact our sales department for further details, make an appointment for demonstration or make a purchase: sales@ansuz-acoustics.com

Sparkz TC Harmonizer

Ansuz Sparkz TC harmonizer – when connected to the power source, it will create a harmonious atmosphere for your components and listening environment - it can be heard and felt. The effect can be significantly enhanced  with additional SparkzTC, eg. in Ansuz Mainz8 Power Distributor. The Sparkz TC Harmonizer is fitted with our Noise Suppressing Coil Technology (NSC).


NSC-wide.png
SparkzTC-8-span.jpg
P-level.png

P-level

With the implementation of the Ansuz core technologies, the POM-level offer a performance at the highest audiophile level.

A-level.png

A-level

The A-level (Aluminium) is an efficient resonance absorber in it self, but processed with anodized aluminum details, the level gets even more resonance adjusting. All Ressonance Control accessories specified above, comes in A-level.

C-level.png

C-level

The C-level (Ceramics) is easily recognizable, because of the hard-anodized aluminum units and significant color. The process provides the aluminum with even better resonance damping properties. The Darkz, Darkz Adjustable and Darkz Cable Lifter, Ressonance Control accessories all comes in C-level.

D-level.png

D-level

The D-level (Diamond), with our best materials, the best mechanical qualities available and nothing else spared in order to offer you a higher reference in ressonance control than what has been possible to experience up until now. The precision-turned aluminum items have received surface treatment with a diamond/carbon connection in a particle accelerator for a period of 18 hours, all in order to ensure the unique properties of this quality level. The Darkz, Darkz Adjustable and Darkz Cable Lifter, Ressonance Control accessories all comes in D-level.